Vitoconnect 100 OPTO1

Communication Interface

Communication interface for remote monitoring and remote control of heating systems

Interface between boiler and applications
For Vitotronic control units with Optolink interface
Operation and remote maintenance via app
Comprehensive safety concept

Your local Viessmann sales partner will provide you with individual advice

Vitocom 100 Communication Module (Type OPTO1)

The Vitoconnect 100 is the interface between the boiler and the app for controlling the heating system and remote maintenance via ViGuide. It is connected directly to the Vitotronic control unit via a cable.

The Vitoconnect 100 uses a comprehensive security concept that has successfully passed the VDE Smart Home information security test.

WiFi module for connection to a DSL router, for wall mounting
Power cable with plug-in power supply (1 m long)
Connection cable with connection of Optolink/ WiFi module/ boiler control unit (length 3 m)

Via Optolink interface with the boiler control unit
Via WiFi with DSL router

Plug-in power supply (230 V / 50 Hz)
WiFi Module/Optolink Connection Cable
WiFi connection to connect to the Internet

Control units for wall-mounted or storage combi boilers

Vitotronic 200, types HO1, HO1A, HO1B, HO1D, HO2B, HO2C
Vitotronic 200 RF, types HO1C, HO1E

Control units for floor-standing boilers

Vitotronic 200, type KO1B, KO2B, KW6, KW6A, KW6B, KW1, KW2, KW4, KW5
Vitotronic 300, type KW3

Control units for heat pumps and hybrid devices

Vitotronic 200, types WO1A, WO1B and WO1C

Control units for solid fuel boilers

Vitoligno 300-C with Ecotronic and software version 2.12 or higher
Vitoligno 200-S with Ecotronic and software version 2.04 or higher
Vitoligno 250-S with Ecotronic and software version 2.00 or higher
Vitoligno 300-P with Vitotronic 200 FO1
Vitoligno 300-S

Port 443 (HTTPS) and port 123 (NTP) must be open.
The MAC address is printed on the device label

Before commissioning, check the system requirements for communication via a local IP / WiFi network.
Vitoconnect 100 requires an available internet connection with a fixed data rate (no time or volume limits).

Downloads

Installation and Maintenance Instructions

PDF - 1.6 MB

Commissioning of Vitoconnect

PDF - 520.5 KB

Open Source Licenses for Vitoconnect 100 Type OPTO1

PDF - 191.5 KB

Open source component source code

Version 1.2.2

Improved connectivity to some Vitocal appliances
If the wrong password is entered after changing the WiFi password, Vitoconnect opens the hotspot after 30 seconds to re-enter the password

Version 1.2.4

General Improvements

Version 1.3.1

Bug fixes

Version 1.3.3

Fixing WPA2 KRACK WiFi Attack

Version 1.4.0

General Improvements

Version 2.6.0

Upgrading to a new backend

Vitoconnect Open Source Components Version 1.1.2 Vitoconnect Open Source Components Version 1.2.2 Vitoconnect Open Source Components Version 1.2.4 Vitoconnect Open Source Components Version 1.3.1 Vitoconnect Open Source Components Version 1.3.3 Vitoconnect Open Source Components Version 1.4.0 Vitoconnect Open Source Components Version 2.6.0

Vitoconnect OT

If your heat generator does not have an Optolink interface (circled in red in the figure) and supports the OpenTherm standard, you will need Vitoconnect OT.