Air purification and ventilation system
The Vitovent 200-P ventilation system combines indoor air purification with outdoor air supply. The result: good air quality and aerosol minimization.
-
Air flow: up to 800 m³/h
-
Low CO₂ concentration
-
HEPA filters remove 99.99% of all viruses
-
Meets the criteria of TÜV Rheinland
Your local Viessmann sales partner will provide you with individual advice.
Effective filtration through a HEPA filter
Removes 99.99 percent of all viral aerosols
Double work
Combines fresh air supply with indoor air filtration
Heat recovery
Reduces heating costs and protects the climate
Built-in automated sensor system
Allows demand-based regulation subject to CO₂ concentration compliance
The principle of displacement
Provides access to fresh air exactly where it is needed
Uniform air distribution without drafts
Silent operation ensures a pleasant indoor climate
Ventilation is independent of the building
Even with windows that can't be opened
Plug & play ensures easy installation
Ideal for quick retrofitting
Vitovent 200-P: for effective health protection in closed spaces
The Vitovent 200-P ventilation system combines indoor air purification with outdoor air supply. The result: good air quality and aerosol minimization.
There is a high risk of infection from aerosols we inhale and exhale. Therefore, appropriate measures are necessary in enclosed spaces to ensure the best possible protection for those present.
The principle of displacement
An advanced system for effective infection control in closed spaces
Coronavirus and influenza are spread primarily through tiny aerosols in our breath. This health risk increases significantly in rooms with closed windows and doors. Simply ventilating the room is not enough to combat this risk. Therefore, the Vitovent 200-P ventilation system combines two measures: indoor air purification and the introduction of fresh outdoor air. This significantly reduces the risk of infection:
- HEPA filters remove 99.99% of all viruses
- Low CO2 concentration
- Fresh and clean air in all areas of the room
Thanks to its plug-and-play design and connection to a standard 230V power outlet, the Vitovent 200-P can be installed in just a few hours. This makes it an ideal addition to an existing system and eliminates the need for costly ductwork for air distribution.
Fresh air automatically when needed
Smart sensors continuously monitor CO2 concentrations in the room. The system adjusts air volume as needed, depending on CO2 levels , eliminating the need for timed programs or other controls.
Continuous ventilation that saves energy
Thanks to the integrated heat recovery and humidity control system, very little heat energy is lost compared to window ventilation. Furthermore, the system maintains a pleasant indoor climate during the winter months thanks to balanced humidity levels.
Meets the criteria of TÜÜV Rheinland
Following extensive testing by TÜÜV Rheinland, the Vitovent 200-P was found to comply with the design requirements of VDI 6022-1 (1) and the hygiene requirements of VDI 6022-1 for ventilation and air conditioning systems.
Product details
| Principle |
Moving |
|---|---|
| Air flow |
Up to 800 m3/h |
| Heat recovery |
up to 96% |
| Room size |
Up to approximately 90 m2 |
| Number of residents |
Up to 30 |
| Filtration class |
F7 (outside air) | HEPA H14 (recirculated air) |
| Sound pressure level in a typical classroom* |
≤ 40 dB (A) | * Auditorium volume 250 m3 , average reverberation time 1 second |
| Section of the product |
|
